Product model Parameters
|# of Stages
|Largest Moving Stage Diameter(mm)
|the largest sleeve OD(mm)
|WTFC 4TG-F175*57 square meters,with 500 employees
*Capacity:Annual production of more than 200,000 sets
*Equipment:700set ,invested a large amount of money in introducing 1 electroplating production line.
*Delivery time:20 Days
*Service:52 Service Outlets nationwide,24-hour Service
4.Quality guarantee system
Program before Delivery
1. Trial Operation Test
2. Start-up Pressure Test
3. Pressure-Tight Test
4. Leak Test
5. Full Stroke Test
6. Buffer Test
7. Testing the Effect of Limit
8. Load Efficiency Test
9. Reliability Test
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test
5..Guarantee and after sale service:
1.Complete Manufacturing Processes:
2.Strict Quality Control system:
3.Rich Market Experiences:
ZheJiang CHINAMFG hydraulic co.,ltd.
Add:500m east of Xihu (West Lake) Dis. Railway Station ,HangZhou city,ZheJiang Province,China
A specialized hydraulic design,R&D,and manufacturing enterprise
Can single-acting hydraulic cylinders be used in construction equipment like dump trucks?
Yes, single-acting hydraulic cylinders can be used in construction equipment like dump trucks. Here’s a detailed explanation:
Dump trucks are commonly used in construction and mining industries to transport and unload bulk materials such as sand, gravel, dirt, and debris. These trucks are equipped with hydraulic systems that enable controlled lifting and tilting of the truck bed to unload the materials.
Single-acting hydraulic cylinders are often employed in dump trucks to provide the necessary force for raising and lowering the truck bed. In a typical dump truck configuration, one or more single-acting hydraulic cylinders are mounted between the truck chassis and the bed.
When it comes to raising the truck bed, hydraulic fluid is pumped into the pressure chamber of the single-acting hydraulic cylinder. The pressure forces the piston to extend, thereby lifting the bed to an inclined position for unloading. The weight of the materials being dumped assists in the gravity-driven tilting process.
Once the materials are unloaded, the hydraulic fluid is released or redirected from the pressure chamber, allowing the weight of the truck bed and gravity to retract the piston and lower the bed back to its original position.
The use of single-acting hydraulic cylinders in dump trucks offers several advantages:
1. Simple Design: Single-acting hydraulic cylinders have a relatively straightforward design, making them cost-effective and easy to maintain.
2. High Lifting Capacity: These cylinders can generate significant lifting force, enabling dump trucks to handle large loads.
3. Controlled Unloading: The hydraulic system provides precise control over the raising and lowering of the truck bed, allowing for controlled and efficient unloading of materials.
4. Durability: Single-acting hydraulic cylinders are designed to withstand heavy-duty applications and harsh operating conditions commonly encountered in construction environments.
5. Compatibility: Dump trucks are typically designed to accommodate single-acting hydraulic cylinders, making it easier to integrate these cylinders into the existing hydraulic systems of the trucks.
It is important to note that while single-acting hydraulic cylinders are commonly used in dump trucks, other types of hydraulic cylinders, such as double-acting cylinders, may also be utilized depending on the specific design and requirements of the dump truck.
In summary, single-acting hydraulic cylinders can indeed be used in construction equipment like dump trucks. These cylinders play a crucial role in enabling controlled lifting and tilting of the truck bed, facilitating efficient unloading of materials in construction and mining operations.
How does a single-acting hydraulic cylinder handle variations in hydraulic fluid flow rate?
A single-acting hydraulic cylinder is designed to handle variations in hydraulic fluid flow rate effectively. Here’s a detailed explanation:
Hydraulic fluid flow rate plays a crucial role in the operation of hydraulic systems, including single-acting hydraulic cylinders. These cylinders rely on hydraulic fluid flow to extend or retract the piston and generate force. Here are some key points on how a single-acting hydraulic cylinder handles variations in hydraulic fluid flow rate:
1. Flow Control Valves: Single-acting hydraulic cylinders can incorporate flow control valves to regulate the hydraulic fluid flow rate. Flow control valves, such as flow restrictors or flow control orifices, are installed in the hydraulic circuit to control the amount of fluid flowing into or out of the cylinder. These valves can be adjusted to restrict or increase the flow rate, allowing for precise control over the cylinder’s speed and force generation. By adjusting the flow control valve, variations in the hydraulic fluid flow rate can be managed, ensuring consistent performance of the cylinder.
2. Pressure Compensation: Single-acting hydraulic cylinders are typically connected to a hydraulic power unit that maintains a certain level of hydraulic pressure. When variations in hydraulic fluid flow rate occur, the pressure compensation mechanism of the hydraulic power unit helps maintain a consistent pressure within the system. This compensation ensures that the cylinder receives an adequate supply of hydraulic fluid, regardless of the flow rate variations, allowing it to operate smoothly and generate the desired force.
3. Accumulators: In some cases, single-acting hydraulic cylinders can be equipped with accumulators to handle variations in hydraulic fluid flow rate. An accumulator is a device that stores hydraulic fluid under pressure. During periods of high flow rate, the accumulator stores excess fluid. When the flow rate decreases, the accumulator releases the stored fluid to compensate for the reduced flow. This helps maintain a consistent flow rate to the cylinder, ensuring its proper operation even during fluctuations in the hydraulic fluid flow rate.
4. System Design: The overall design of the hydraulic system that includes the single-acting hydraulic cylinder can also contribute to handling variations in hydraulic fluid flow rate. Proper sizing and selection of components, such as pumps, hoses, and valves, are important considerations. The system should be designed to accommodate the expected flow rate variations while maintaining adequate fluid supply to the cylinder. By ensuring an appropriately designed hydraulic system, the single-acting hydraulic cylinder can handle variations in flow rate effectively.
It is essential to consider factors such as load requirements, operating conditions, and safety considerations when selecting and configuring the hydraulic system and components to ensure optimal performance of the single-acting hydraulic cylinder.
In summary, a single-acting hydraulic cylinder handles variations in hydraulic fluid flow rate through the use of flow control valves, pressure compensation mechanisms, accumulators, and proper system design. These features enable the cylinder to maintain consistent performance and generate the desired force, regardless of fluctuations in the hydraulic fluid flow rate.
What is a single-acting hydraulic cylinder and how does it operate?
A single-acting hydraulic cylinder is a type of hydraulic cylinder that operates in one direction, utilizing hydraulic pressure to exert force in the extending stroke. Here’s a detailed explanation:
1. Construction: A single-acting hydraulic cylinder consists of a cylindrical barrel, a piston, a piston rod, and a single hydraulic port. The cylinder barrel houses the piston, which divides the cylinder into two chambers: the pressure chamber and the return chamber. The piston rod is connected to one end of the piston and extends outside the cylinder. The hydraulic port is located at the base of the cylinder and is connected to a hydraulic power source.
2. Operation: When hydraulic fluid is supplied to the pressure chamber through the hydraulic port, it exerts pressure on the piston, causing the piston to move in the extending stroke. This movement pushes the piston rod outward, generating force at the end of the rod. The force generated by the hydraulic pressure can be used to perform various tasks, such as lifting, pushing, or holding objects.
3. Return Stroke: Unlike double-acting hydraulic cylinders that can generate force in both directions, single-acting cylinders rely on external forces or mechanisms for the return stroke. When the hydraulic pressure is released or redirected, the piston is pushed back to its original position by external forces, such as gravity or springs. This return stroke is passive and does not generate force.
4. Applications: Single-acting hydraulic cylinders are commonly used in applications where force is required in one direction only, and the return stroke can be accomplished by external means. Some common applications include lifting equipment, dump trucks, hydraulic jacks, and certain types of industrial machinery.
5. Advantages: Single-acting hydraulic cylinders have a simpler design compared to double-acting cylinders, which typically means they are more cost-effective and easier to maintain. They are also well-suited for applications where the return stroke can be accomplished by external forces, eliminating the need for additional hydraulic components.
6. Limitations: The main limitation of single-acting hydraulic cylinders is their inability to generate force in the retracting stroke. This restricts their use in applications that require bidirectional force or precise control over both extending and retracting movements.
In summary, a single-acting hydraulic cylinder operates by utilizing hydraulic pressure to generate force in the extending stroke. It consists of a barrel, piston, piston rod, and a single hydraulic port. While they have certain limitations, single-acting cylinders are cost-effective and suitable for applications where force is required in one direction and the return stroke can be achieved by external means.